The following is a guide on how to change your IP in 30 seconds or less. This can be used if your IP has been banned from a game server, or on gunbound if your IP get's blocked. I've tried this on both Windows XP and Windows 2000, and it has worked!
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit okay
You should now be at an MSDOS prompt screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"
* You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks. *
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up. I use my same ip address with a different number at end of ip, same sub mask, same default gateway.)
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "okay" button here
14. Hit the "okay" button again
*You should now be back to the "Local Area Connection" screen.*
15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
18. Hit "okay"
19. Hit "okay" again
20. You now have a new IP address
With a little practice, you can easily get this process down to 15 seconds.
*Note* This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit okay
You should now be at an MSDOS prompt screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"
* You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks. *
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up. I use my same ip address with a different number at end of ip, same sub mask, same default gateway.)
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "okay" button here
14. Hit the "okay" button again
*You should now be back to the "Local Area Connection" screen.*
15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
18. Hit "okay"
19. Hit "okay" again
20. You now have a new IP address
With a little practice, you can easily get this process down to 15 seconds.
*Note* This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back
0 comments: